Wolturnus Rex 350 User’s Manual 2019
Power Wheelchair
Transport and storage
5 Transport and storage
5.1 Transport
Wolturnus A/S recommends looking through all the safety information before using or transporting the pro-
duct. It is advised not to disassemble the chair before transport, but to use CE certified products recommended
by Wolturnus A/S, as mentioned in section 1.5, for more information contract Wolturnus A/S customer support
at (+45) 9671 7170 or on Mail: [email protected]
5.2 Transfer
The method of transfering in and out of the wheelchair is an individual choice made be the wheelchair user, but
it is recommended to have a trained professional present while learning new transfer methods.
The following description is based on transfer without third-party help and from one wheelchair to another.
•
Make sure the power is turned off before starting the transfer.
•
Make sure the casters are turning the direction of the transfer, this will provide more stability to your trans-
fer.
•
Make sure armrests and seatbelts are not in the way of the transfer.
•
If you have a foldable footrest, fold them up and out of the way. Otherwise take your feet out of the foot-
rest.
•
Make sure you are as close to the transfering object as possible.
•
If the transfering object is a wheelchair, make sure its wheel locks are applied.
•
Make the transfer, while containing stability and control.
Wolturnus A/S does not cover any cost related to accidents with non-approved external components.
See the manual for fixation of wheelchair in motorvehicles for information about car fixation and safety.
INFORMATION
The wheelchair may tip over. Wolturnus recommends to use the anti-tip device at all times.
WARNING!
Be sure to read all safety instructions before handling the electrical wheelchair, to avoid damage to people
or property.
CAUTION!
14
Summary of Contents for Rex 350
Page 2: ...Wolturnus Rex 350 User s Manual 2019 Power Wheelchair Content 2...
Page 34: ......
Page 35: ......
