WOLTURNUS Rex 350, User Manual

Page: 26 / 36

Wolturnus Rex 350 User’s Manual 2019 Power Wheelchair
Troubleshooting
9 Troubleshooting
During routine maintenance, it may be necessary to make adjustments or repair faults. In most cases, the solu-
tion to the problem can be found on the following list:
Problem Solution Reference
Castor makes noise
or is resistant
• Check if there is dirt between the fork and castor or dirt
in the fork ball-bearings.
• Clean off the dirt and tighten the screws. If they do not
roll freely, change the ball-bearings.
Section 8.3
Section 8.2
Front fork shakes
• Loosen and remove the bearing housing cap and tighten
the nut to a degree where the front fork with wheel can
still easily rotate.
• Make sure the castor is vertical.
Section 8.3
Loud clicking noise
• Check and tighten the screws in the rear wheel and
castor mounting brackets
Section 8.3
Section 8.3
Footrest is lopsided
• Check that the foot plate is horizontal and adjust the
footrest height.
Section 6.8
If the problem cannot be solved with the aid of the troubleshooting section, contact the supplier or Wolturnus
A/S. Contact information: section 13.
26