52
5.2 Replacing of the illuminant
WARNING!
The LED-illuminant must be replaced by a competent person
only
. If the LED-illuminant is damaged, please contact a qualified
professional (
not covered by the guarantee
)
NOTICE!
This products contains a LED light source of energy efficiency
class G according to EU-Regulation 2019/2015.
6. Trouble shooting
MALFUNCTION
POSSIBLE CAUSE
MEASURE
The appliance does not work at all.
➢
The plug of the appliance is not
connected to the socket.
➢
The plug has become loose.
➢
The socket is not supplied with
energy.
➢
The fuse is switched off.
➢
The voltage is too low.
➢
Check the corresponding socket by
connecting it with another appliance.
➢
Check the fuse box.
➢
Compare the data on the model
plate with the data of your energy
supplier.
The compressor does not work at all.
➢
Incorrect energy supply.
➢
Check the energy supply.
The compressor operates for too long.
➢
The appliance has been switched off
for a while.
➢
Too much or too hot food in the
appliance.
➢
Doors opened too often or too long.
➢
The appliance needs some time to
reach the preset temperature.
➢
Remove any hot food.
➢
Do not open the door too often/too
long.
Unsatisfactory cooling capacity.
➢
The door was frequently opened.
➢
The door is not properly closed.
➢
Encrusted ice inside the appliance.
➢
The current temperature setting is
too warm
➢
Warm or hot food inside the
appliance.
➢
The appliance is overfilled.
➢
The door seals are damaged.
➢
Select a different setting if necessary.
➢
Check the door/door seals.
➢
Defrost the appliance.
