24
Wolfgang Warmbier GmbH & Co. KG
Data Evaluation and Report Generation with ETC Software
All data, including the structure of the ESD elements, can be
transferred to the PC and evaluated with the help of ETC soft-
ware. Additional information can be edited here subsequently for
the individual measurements. After pressing the appropriate key,
a report including all measurements within a given structure is
generated, or the data are exported to an Excel spreadsheet.
Note
The database is exited when the rotary selector switch is
turned. Previously selected parameters in the database
are not used for the measurement.
10.4.1 Use of Barcode Scanners and RFID Readers
Search for an Already Scanned Barcode
The search can be started from any switch setting and menu.
➭
Scan the object’s barcode.
The search is started based on the currently selected structural
element down through lower hierarchical levels. The found bar-
code is displayed inversely.
➭
This value is accepted after pressing the ENTER key.
Note
An already selected object cannot be found.
Continued Searching in General
Regardless of whether or not an object has been found,
searching can be continued by pressing this key:
– Object found: Searching is continued underneath the previ-
ously selected object.
– No further object found: The entire database is searched at
all levels.
Reading In a Barcode for Editing
If the menu for alphanumeric entry is active, any value scanned by
means of a barcode or RFID reader is accepted directly.
