Wolfgang Puck BFPR1000, Use And Care Manual

Page: 5 / 38

Attachments For Your
Food Processor
Processing Blade
Spatula
5-Cup Mini Bowl and Mini Processing Blade
Reverse Shredding Disc
Reverse Slicing Disc
Stainless steel dual edged processing blade
is designed for chopping, mixing, blending,
pureeing and kneading.
The spatula is ideal for assisting with all
food processing tasks.
Caution:
Never use spatula while food
processor is plugged in.
Fits directly into the 12-cup Work Bowl
and is perfect for smaller batches such as
spices, garlic cloves etc.
The reversible shredding disc allows for a
choice between fine (2mm) on one side,
and coarse (5mm) on the other.
Precision honed slicing disc with 2mm on
one side, and 5mm on the other.
Only handle by
black center hub
Only handle by
black center hub
Assembling Your
Food Processor
Before you assemble the food processor,
ensure that the power cord is unplugged.
Place the Motor Housing facing you on a
dry, level surface.
Place the Work Bowl onto the Motor
Housing. The Work Bowl will only sit
correctly on the Motor Housing when the
handle is at the 3 o’clock position (see
figure 1).
Rotate the handle clockwise to lock, until
the handle is at the 6 o’clock position (see
figure 2).
Position the lid onto the Work Bowl as
shown in figure 3a. Ensure that all four
tables on the lid are recessed in the
receptacles of the Work Bowl. To lock,
turn the lid clockwise as shown in figure
3b until it clicks into place.
1
2
3
4
Note: Your food processor motor will not
turn on unless both the bowl and lid are
properly assembled as outlined above.
Figure 1
Figure 2
Figure 3a Figure 3b
8 9