10
9
Assembling Your Attachments
figure 9
8
Fit the Processing Cover to the Processing
Bowl (see figure 10), and place the Food
Pusher in the Feed Tube.
9
Plug the power cord into a 120V AC power
outlet.
10
Start processing using the CONTINUOUS
ON or PULSE button.
11
When processing is complete, remove the
Spindle and Blade from the Processing
Bowl before removing the processed food.
Warning!
Make sure motor has stopped
completely before removing cover. If machine
does not stop within four (4) seconds from
turning power off call 800-275-8273 for assistance.
Do not use machine.
Always turn machine off from Power button,
NEVER use the lid as a means of turning the
machine on or off.
figure 10
continued
Using Your Food Processor
Your Food Processor has two speed controls, CONTINUOUS ON, or
PULSE. Please note that your Food Processor will not operate unless
the Bowl and Lid are properly assembled according to the section
“Assembling Your Food Processor”. The safety interlock must
be engaged.
CONTINUOUS ON
Press the CONTINUOUS ON button located on the left side of the
control panel. Your processor will stay on as long as this button is
engaged. To stop the motor from spinning depress the CONTINUOUS
ON button once again.
PULSE
For pulse chopping, depress and hold the PULSE button located on
the right hand side of the control panel. The motor will continue to spin
for as long as you hold the PULSE button down. When pulsing, always
allow enough time for the food to fall down back into the blades in
between pulses.
The PULSE button allows you to more precisely control processing.
Never control pulsing by opening and closing the lid.
Using the Chopping Blade
The stainless Chopping Blade is used for chopping, mixing, kneading,
pureeing, and emulsfying.
1
Always use the metal Chopping Blade when chopping, pureeing,
mixing, or kneading. Place the Blade into the food processor prior
to adding food. For more uniform results, food should be cut into
pieces no larger than 1-inch . If food is not uniform, you may get
inconsistent results. For best results, process no more than 2 cups
at a time.
2
Place Cover onto Processor Bowl and lock into place. Place Food
Pusher into Cover to prevent splatter.
3
For precise chopping, use the PULSE button. For pureeing,
kneading, or fine chopping, use the CONTINUOUS ON button. If
necessary, use a spatula to scrape down the sides of the bowl.
Ensure that your Food Processor is powered off first.
HSN_4CupFoodProcManual 8/3/07 4:04 PM Page 9
