Wolfgang Puck BFPR0035 Bistro collection, Use And Care Manual

Page: 5 / 26

7 8
Assembling Your Attachments
Note: All attachments must be firmly attached
to the Spindle. Always adjust the attachments
until you are sure that they are correctly fitted.
5 Place the Chopping Blade over the
Spindle until it snaps into place. See figure
5. The top of the Chopping Blade has a
rim. Be sure to slide with rim side up onto
Spindle. Refer to figure 6 for correct
placement of the Chopping Blade onto
the Spindle.
Note: If Chopping Blade is incorrectly
placed onto Spindle (see figure 7), use a flat-
tipped screwdriver or other blunt instrument
to depress the flexible side tabs in order
to release the Blade from the Spindle.
See figure 8.
6 Place the assembled Spindle/Chopping
Blade onto the Drive Shaft, see figure 9,
next page. Ensure that the Spindle
assembly is fully seated into the Drive
Shaft. You should not see any of the metal
stem on the bottom of the Spindle if it is
properly assembled. It may be necessary
to turn the Spindle slightly left or right.
7 Place ingredients into the Processing Bowl.
Before Your First Use
Before you assemble the Food Processor,
ensure that the power cord is unplugged.
1 Place the Motor Base facing you on a dry,
level surface.
2 Place the Processing Bowl onto the Motor
Base, the bowl will only sit correctly on the
base when the handle is at the 3 o’clock
position, see figure 1.
3 Rotate the handle clockwise to lock, as
indicated by the graphics on the left side
of the motor base. The Bowl Handle should
be at the 6 o’clock position, see figure 2.
4 Place the Lid on the Processing Bowl
with the tab on the Lid to the right of the
handle. See figure 3. Ensure that the center
pin of the Lid is inserted into the hole on
the shaft. Turn the Lid clockwise until it
engages the interlock on the handle.
See figure 4.
Note: Your Food Processor will not operate
unless your bowl and lid are assembled properly.
Warning: Use caution, as blades are
extremely sharp. Always handle all blades by
their central plastic section. Never grasp the
cutting blade itself.
figure 1
figure 2
figure 3
figure 4
Prior to using your Food Processor, wash all parts as outlined in the
section “Care and Cleaning.”
Assembling Your
Food Processor
figure 5
figure 6
figure 7
CORRECT PLACEMENT
WRONG PLACEMENT
figure 8
HSN_4CupFoodProcManual 8/3/07 4:03 PM Page 7