
Grill Module Operation
The Wolf electric grill module operates by automatically
cycling the heating elements between zero power and full
power. As the heat is increased on the control panel, the
element will stay at full power for longer periods and have
shorter periods of zero power.
INITIAL START-UP
Before using for the first time, clean your grill module
thoroughly with hot water and a mild detergent. Rinse and
dry with a soft cloth. This removes any residual oil and
grease left on the surface from the manufacturing process.
Refer to care recommendations on page 16. The grill
module must be reassembled in the correct alignment as
shown on the previous page.
When the grill module is powered up for the first time it will
default to lock mode. To unlock the control panel, touch
and hold the key symbol for 3 seconds.
Allow a initial burn-in period of approximately 10 minutes
before cooking on the grill module.
IMPORTANT NOTE:
A small amount of smoke and odor
may be noticed during the initial break-in period.
Modes of Operation
LOCK MODE
In lock mode, all touch pad operations on the control panel
are disabled and the heating elements are deenergized. A
steady glowing light within the key symbol indicates that
the module is locked. Refer to the illustration below.
•
To lock the control panel, touch and hold the key
symbol for 3 seconds. Three chimes will sound and the
light within the key symbol will illuminate. The module is
now in lock mode.
•
To unlock the control panel, touch and hold the key
symbol for 3 seconds. Two chimes will sound and the
light within the key symbol will go out. The module is
now in idle mode.
IMPORTANT NOTE:
When the module is powered up for
the first time or if there has been a power outage, the
module will default to lock mode.
IDLE MODE
After unlocking the control panel as described in lock
mode, the module enters the idle mode of operation. All
touch pad operations on the control panel are enabled.
Grill Module Operation
8
Select LED
display
Lock key
touch pad
Power bar
indicator
SELECT
touch pad
Temperature
adjustment
OFF ON
touch pad
Timer LED
display
CLEAR
touch pad
Control panel.