wolfappliance.com
|
3
CONVECTION STEAM OVEN
Product Information
Important product information including the model and
serial number are listed on the product rating plate. The
rating plate is located on the left side of the front face frame.
The oven door must be open to view the rating plate. Refer
to the illustration below.
If service is necessary, contact Wolf Factory Certified
Service with the model and serial number. For the name of
the nearest Wolf Factory Certified Service or for questions
regarding the installation, visit the contact & support section
of our website, wolfappliance.com, or call Wolf Customer
Care at 800-222-7820.
Rating plate location.
RATING PLATE
Installation Requirements
The convection steam oven can be installed in a standard
or flush inset application. The electrical supply for the oven
must be located in an adjacent cabinet.
Finish the edges of the opening. They may be visible when
the door is open.
For standard installations, face trim will overlap stiles and
rails. Refer to the chart.
For flush inset installations, a minimum
1
/
8
"
(3)
reveal is
required on all sides. To ensure consistent reveals, each
corner of the opening must be exactly 90°.
If the convection steam oven is installed above or below
a Wolf E series oven in a flush inset application, a
1
/
4
"
(6)
reveal is required.
INSTALLATION REQUIREMENTS
BASE SUPPORT
MIN
Convection Steam Oven
100 lb
(45 kg)
TRIM OVERLAP
24" MODEL
30" MODEL
Top
3
/
16
"
(5)
3
/
16
"
(5)
Bottom
0"
(0)
0"
(0)
Sides
11
/
16
"
(18)
3
7
/
8
"
(98)