Page 18
4
Remove the burner assembly from the unit.
Burner Cap
Burner Assembly
Igniter
Electrode Wire
Remove the Burner Pan
Lift the burner pan from the burner box.
Remove the Receptacle
1
Use a Phillips screwdriver to remove the mounting screws
from the receptacle.
2
Remove the receptacle from the unit.
Remove the Valve Switch
1
Use a Phillips screwdriver to remove the color-coded screw
from the switch.
2
Lift the switch from the valve.
3
Remove the black wire from the normally-open (NO)
terminal.
4
Remove the red wire from the common (C) terminal.
VALVE SWITCH INSTALLATION
Install the Valve Switch
1
Install the red wire onto the common (C) terminal.
2
Install the black wire onto the normally-open (NO) terminal.
3
Place the switch onto the valve.
4
Use a Phillips screwdriver to install the color-coded screw
onto the switch.
TIP: Do not over-torque the screw when installing the new
switch.
Install the Receptacle
1
Install the receptacle onto the burner valve.
2
Use a Phillips screwdriver to install the mounting screws
into the receptacle.
Install the Burner Pan
Place the burner pan on the burner box.
CG Professional Gas Cooktop Service Manual
REMOVE ALL BURNER ASSEMBLIES (continued)
service.subzero.com
828386 REV. A 06/2018
17
