21
3062815_0110
13. Roof integration, interlocking tile
1. Push in the intermediate panels as per diagram. If this should jam during
the installation, correct the collector position. Then bend the tabs at the top
of the intermediate panels to prevent them from sliding through.
2. Tighten all screws and nuts to secure the collector.
3. Pull off all the protective foil from the flashing tape and affix it to the tiles.
Create a fold at the ends of the flashing tape bases on the left and right
(see Fig.).
Create a fold
Tabs
Intermediate
panel
Intermediate panels
Flashing tape
Installation of the
intermediate panels
Fold