Wolf Garten LI-ION POWER HSA 45 V, Original Operating Instructions

Page: 11 / 92

11
G
z
Wear suitable clothing. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away from
moving parts.
Loose clothing and jewelry and long hear can be
caught in moving parts.
z
When using tools with dust extraction and collection
devices, ensure that they are properly mounted.
The use of
dust extraction devices helps reduce the production of dust in
the working area.
Proper use of electric tools
z
Do not exceed the maximum load of the tool. Use the tool
only for the intended purpose.
To ensure safe and efficient
working, operate the electric tool only within the specified power
range.
z
Do not use electric tools whose switches are defective.
Electric tools that cannot be properly switched on or off are
dangerous and must be repaired without delay.
z
Before adjusting the tool, changing accessory parts or
putting the tool away for storage, disconnect the power
plug from the socket or remove the battery.
This safety
measure reduces the risk of inadvertent tool start.
z
Store the electric tool outside the reach of children. Do not
allow persons who have not read these instructions to
operate the tool.
When operated by inexperienced persons,
electric tools can be very dangerous.
z
Handle the electric tool with care and service it regularly.
Ensure that all moving parts can work properly and are not
jammed and regularly inspect the tool for defective or
damaged parts that might impair its function. Have
damaged parts repaired before you start the tool.
Many
accidents are caused by insufficiently maintained electric tool.
z
Keep the cutting parts sharp and clean. Carefully maintained
cutting tools with sharp cutting edges will rarely get jammed and
are easier to operate.
z
When using the electric tool, the accessories and
replacement parts, strictly adhere to the instructions in this
manual. Take into account the actual working conditions
and the task in hand.
The use of electric tools for purposes
other than the intended can lead to dangerous situations.
Proper use of battery-powered tools
z
Recharge the battery only with chargers that have been
specifically recommended by the manufacturer.
If a different
charger is used, there is a risk of fire.
z
Operate the electric tool only with the battery provided for
this task.
The use of other batteries can lead to injury or fire.
z
Ensure that the battery is never in contact with metal
objects such as paper clips, coins, keys, nails or screws, as
they could short-circuit the contacts.
Short-circuiting the
battery contact can lead to fire and injury from burns.
z
If the battery is used incorrectly, fluid might leak out. Avoid
contact with the fluid. In event of accidental contact, rinse
with water. In case of fluid contact with the eyes, consult a
doctor.
Leaking battery fluid can cause irritation of the skin and
burns.
Service
z
If the electric tool needs to be repaired, have the repair
carried out by specialist personnel and instruct them to use
only original spare parts.
This ensures the operational safety
of the electric tool.
Tool-specific safety instructions for hedge shears
z
Keep all body parts away from the cutting blade. Never
attempt to remove any cuttings or hold material to be cut
while the blade is still running. Do not remove cuttings that
have become stuck unless the tool is switched off.
A
moment of carelessness while using the battery-powered
shears may cause serious injury.
z
Only carry the hedge shear by its handle and if the blade is
standing still. Always slip on the protective cover when
transporting or storing the battery-powered shears.
Handling the tool carefully reduces the risk of injury caused by
the blade.
z
Keep the cable away from the cutting range. While working,
you may inadvertently cut the cable as it may be hidden by the
shrubbery.
z
The machine is designed exclusively for cutting hedges.
Use for purposes other than those intended qualify as improper
use. The manufacturer/supplier is not responsible for any da-
mages that result from improper use. The operator is solely re-
sponsible for assuming all risks.
z
Never attempt to use a machine that is not fully assembled or
one that has been altered in a manner that is not permitted.
z
Work at a height where you do not run the risk of the blade
coming into contact with the ground.
z
Reverse blade
If the blade becomes jammed by thick branches, for example,
the hedge shears must be shut off:
–
Remove battery.
–
Do not touch running blades.
–
Remove the cause of the blockage.
z
Do not switch on the tool until your hands and feet are far
enough away from the cutting blades.
z
Please note that there is always a risk of injury due to residual
charge when switching on the device even after it has been
discharged.
z
These tools are not intended to be used by persons with
insufficient experience and/or lack of skills or persons with
limited physical, sensory or mental abilities unless these
persons are supervised or instructed on the use of the tools by
a person responsible for the safety of these persons.
z
Young adults below the age of 16 may not use the tools.
Maintenance
z
Do not clean or carry out any maintenance work on the tool until
after you switch the motor off and pull the mains plug.
z
Clean and oil the blades (we recommend using WD-40 multi-
purpose oil) after each use.
z
Use the blade guard to sheath the cutting unit before transport
and storage.
Charger
z
Do not connect the charger to the power socket if it has become
wet or damp.
z
Use the charger in dry rooms only.
z
Disconnect it from the power supply by removing the plug from
the socket. Do not pull the plug by the cable as this could
damage the equipment so that its electrical safety might be
impaired.
z
Never use the charger, if there is visible damage to the cable,
the plug or the charger itself. In this case, have the charger
repaired at a specialized workshop.
z
Never open the charger housing. In the event of malfunction,
have the charger repaired by a specialized workshop.
z
Do not charge the battery-powered shears while using them.
Battery
z
In the event of improper use of the battery pack, there is a risk
of escaping hazardous vapors. Always ensure proper ventilation
and immediately consult a doctor, if you feel unwell. The vapors
might irritate the respiratory track.
1
Risk of fire!
z
Never charge batteries near acids or flammable
materials.
z
Charge battery only at a temperature between 10 - 45 °C.
After heavy use, allow battery to cool down before
charging it.
1
Risk of explosion!
Protect the battery-powered trimmer from direct exposure to
heat and fire.
z
Do not place the battery on radiators. Avoid prolonged
direct exposure to sunlight.
z
Operate the tool only at temperatures between -20 to + 45
°C (-4 to 113 °F).
1
Risk of short circuit
z
For disposal, transport or storage, pack the battery in a
plastic bag or a cardboard box, or isolate the contacts with
adhesive tape.
z
Do not open the battery pack.