o
After the Base Station has been positioned, insert 2 stakes
into the Base Station holes as shown in the figure to the
right. Only after the Base Station position will be tested, will
you insert the 2 remaining stakes.
Laying and fastening Extension Cable
Safety – Avoid injury!
The Extension Cable from the Power Box to the Base Station should be
securely fastened to the ground! It should never present a tripping hazard.
The Extension Cable should cross ONLY over soft surfaces .
It should not cross over hard surfaces (e.g. Sidewalk, driveway) where it
cannot be securely fastened.
o
The 15m (50 ft.) Extension Cable is already
attached to the Base Station Head, but if you need
to disconnect it for any reason, remove the Base
Station Head as shown in the figure to the right:
4.7 At the Power Box Location:
•
Connect the DC Cable from the Power Box to the
15 m (50 ft.) Extension Cable.
•
Connect the Power Box to a regular power outlet
(230V / 120V).
•
The Docking Indicator (1) will light up if
the mower is in the Base Station.
•
The Operating Indicator (3) will light up
if the mower is not in the Base Station.
64
en
Summary of Contents for Ambition Robo Scooter 300
Page 2: ...2 ...
Page 304: ...306 Notes ...
