6.3 Manual Operation
Manual Operation is used when mowing the lawn at unscheduled times.
To initiate Manual Operation when the unit is at the Base Station, press one of the buttons (except the STOP button) to
show the display.
If the battery is fully charged and the mowing schedule is set to 'On', then the start time of the next operation is displayed,
otherwise the current day and time are displayed.
Once the display is shown, choose the operation mode you want as provided in the table below:
Operation Mode
Child Lock is Off
Child Lock is On
Mowing with Edge
–
Mowing the edge before starting to
mow the inner area.
It is recommended to use this mode
once or twice a week, depending on
how fast the grass is growing.
Press the
'Edge before mowing'
(left
arrow) button once
Press the
'Edge before mowing'
(left
arrow) button then press
OK
Mowing without Edge
–
Mowing only the inner area without
the edge.
It is recommended to use this mode
only in the first operation of each
Mowing Cycle.
Press the
'Mowing'
(right arrow)
button once
Press the
'Mowing'
(right arrow)
button then press
OK
Note
– if a Sub-Zone is defined, then once you choose the Operation Mode, then
L1
(Main Zone) will be displayed. Use
the arrow buttons to scroll and choose the required zone to be mowed and press OK.
DŽǁŝŶŐǁŝƚŚĚŐĞͬ
>ĞĨƚĂƌƌŽǁ
^ĞƚƚŝŶŐƐ
^ƚŽƉ;ĚƵƌŝŶŐŽƉĞƌĂƚŝŽŶͿͬ
ĂĐŬǁŚŝůĞŝŶƚŚĞŵĞŶƵ
DŽǁŝŶŐǁŝƚŚŽƵƚĚŐĞͬ
ZŝŐŚƚĂƌƌŽǁ
'KƚŽ
ĂƐĞ;,ŽŵĞͿ
72
en
Summary of Contents for Ambition Robo Scooter 300
Page 2: ...2 ...
Page 304: ...306 Notes ...