821081: RMQ-230 Series User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
13
RMQ-230 Series
Using the OSD Menu
Using the OSD Menu
Configuring the RMQ-230 Series monitors is accomplished in the
OSD
MENU
. Each of the menus in the
OSD MENU
is explained below.
1.
Press the
MENU
button to display the menu.
2.
Use the
Up
and
Down
buttons to navigate through the seven
sub-menu icons.
3.
Press the
ENTER
button to move into the parameter selections in
the chosen sub-menu. The submenus are:
•
STATUS
(Read-only; CH indicates the channel being
configured)
•
COLOR TEMP
•
MARKER
•
AUDIO CONFIG
•
USER CONFIG
•
OSD CONFIG
1)
Page 1:
IMD DISPLAY
2)
Page 2:
IMD PROTOCOL
4.
Use the
Up
or
Down
buttons to cycle through the sub-menus and
sub-menu selections.
5.
When the desired option is highlighted, press the
ENTER
button to
select it.
6.
Use the
Up
or
Down
buttons to adjust the parameter value up or
down, make a selection, or turn a function on or off.
7.
Press the
ENTER
button to save the parameter change and return
to the sub-menu level.
Press the
MENU
button to back out of a parameter or sub-menu. Press
the
MENU
button again to remove the menu from the screen.