821081: RMQ-230 Series User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
8
RMQ-230 Series
Front Panel Features
•
Timecode
: The display format for the timecode is HH: MM: SS: FF.
In the event no timecode is available, the monitor will display
--:--:--:--
. Time code is currently available for SD-SDI ANC-
packetized only.
•
Headphones
: This 1/8” jack receives a standard mini-headphones
plug and provides stereo audio. Inserting a plug here, wired or not,
will mute the speakers.
•
Channels 1 thru 4
: Pressing each of these buttons displays one full
screen with the input signal connected to the corresponding input
on the rear panel. See
Specifications on page 24
for available input
types. The audio source (as defined for that channel’s
AUDIO
CONFIG
menu) will follow the last selected video channel with
these buttons. The menus’ channel number also follows the last
channel button pressed.
•
QUAD
: Pressing this button toggles between quad view (shown in
Figure 1–4 on page 10
) and one-big-and-three-small (as shown in
Figure 1–2 on page 7
). See also
Figure 1–3
below for screen
identification.
Figure 1–3
Screen Identification
•
DVI (HDMI In)
: Pressing this button toggles between
HDMI
and
NONE
. Set this button to
HDMI
when you want to display a HDMI
input, and set it to
NONE
when you want SDI input. This control
only functions for Channel 1. HDMI jack is provided. DVI-D input
requires an adapter (not provided).
•
Menu
: Pressing this button displays the on-screen display
(OSD)
Menu
. Press
MENU
again to revert one menu level or exit out of
MENU
mode.
Screen 1
Screen 2
Screen 3
Screen 4
Quad View
One-Big-with-Three-Small View
Screen 1
2
3
4