821081: RMQ-230 Series User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
9
RMQ-230 Series
Front Panel Features
•
F1/Up and F2/Down
: After pressing the
MENU
button, press
Up
or
Down
to move within submenus. When not in
MENU
mode,
F1
and
F2
are programmable hot keys. Refer to
User Config Menu on
page 18
for details.
•
ENTER
: After pressing the
MENU
button, pressing this button
selects the current menu or menu option. Changes are previewed,
but not saved, until you press the
ENTER
button again.
When the OSD Menu is not displayed, you can press the
ENTER
button to quickly adjust the following parameters.
•
VOLUME
: Adjusts the volume from 0 to 30.
•
BRIGHTNESS
: Adjusts the video brightness from 0 to 100,
where 50 is the typical value.
•
CONTRAST
: Adjusts the image contrast from 0 to 100, where
50 is the typical value.
•
CHROMA
: Adjusts the color saturation from 0 to 100, where
50 is the typical value.
•
Power LED
: Lights red in standby mode and green when on.
•
POWER On/Off
: Toggles the monitor to on or standby mode.
•
Waveform/Vector
: (
Figure 1–4 on page 10
) In quad screen view,
Screen 2 displays the waveform or vector for Screen 1 and Screen 4
displays the waveform or vector for Screen 3.