8 21 19 3:
R M- 23 50 W- H D U se r G u id e
© 20 13 Wo hl e r Te c hn ol og i e s , In c . A l l r ig h ts re se rv ed .
3
RM-2350W-HD User Guide
I n s t a l l a t i o n R e c om m e n d a t i o n s
Installation Recommendations
Mounting
The unit is designed to install into a standard 19” rack. The unit should
be mounted at approximately ear level for optimum frequency
response and at eye level for optimum visual observation. The rack ears
allow tilting for best viewing from higher or lower positions.
Heat Dissipation
No special physical mounting considerations are necessary regarding
heat dissipation except under adverse conditions, provided the
ambient temperature inside the mounting enclosure does not exceed
40
°C (104°F). Adjacent devices can be rack mounted (or stacked)
in proximity to the unit. If the temperature is above 40°C, allow
a 1RU (1.75”/44.45mm) space above and below the unit for air
circulation.
Power
Connect the power adapter output plug (12VDC) to the DC IN jack.
Secure it to the cable retention bracket with a twist tie for support.
Connect the IEC320-C13 AC inlet of power adapter to your AC mains
receptacle using an approved grounded cord.
The power buttons for each screen on the front panel light continuously
when ready. The buttons flash when saving power in stand-by mode.
Compliance
FCC
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
