8 21 19 3:
R M- 23 50 W- H D U se r G u id e
© 20 13 Wo hl e r Te c hn ol og i e s , In c . A l l r ig h ts re se rv ed .
9
RM-2350W-HD User Guide
R e a r P a ne l C o n n e ct o r s
•
Aspect:
The
Aspect
button toggles the aspect ratio between 4:3
and 16:9 for the associated LCD screen when the input signal is SD-
SDI. HD-SDI images are always 16:9 and are not be affected by the
Aspect switch.
•
Power:
Each of the three
Power
buttons turn the associated LCD
screen on and off; the LED glows green to indicate on. When the
indicator above the power switch is green then the unit is receiving
power. When the indicator is flashing, the unit is in stand-by mode.
Rear Panel Connectors
The rear panel feature descriptions refer to the following image.
Figure 1–2
RM-2350W-HD Rear Panel
(Ignore all
RMD
Markings)
•
Video Input Connector
: This auto-detecting, input connector
accepts HD/SD-SDI or analog CVBS video signals. The inputs
comply with SMPTE259M, SMPTE292M/ITU-R BT601. Composite
video inputs comply with SMPTE-170M.
•
HD/SD-SDI Output Connector:
The system re-shapes and
re-clocks an HD/SD-SDI signal before outputting it to this female
BNC connector.
•
RS-485 I/O (on RJ-45)
: These two ports are used for system
software upgrades and dynamic UMD controls.
Video I/O Connectors
DC Power
Tally Lights
Audio I/O (L & R)
RS-485 I/O
Connectors
