8 21 06 8 :
MPE G -3 2 70 & 4 29 0 U s e r G ui d e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
26
C h a p t e r 3 O p e r a t i on
F 1 - F 6 B u t t o n s
The
PMT PID Screen
in
Figure 3–3 on page 25
shows detailed
information for the selected audio and video program map table PID.
Rotate the
Volume
knob to highlight the PMT PID of interest and press
it. The rotate the
Volume
knob and then press to select either
SEL and
Exit
to select that PMT PID and exit this screen and return to the
MPEG
Screen
, or select
EXIT Only
to exit this screen with no changes.
F1 - F6 Buttons
Your choice of options can be accessed directly using the function
buttons. The option or options that each button controls is set in the
Functions Menu on page 37
. By default from the factory, the
Function
buttons are set up as follows:
F1
: By default, the
F1
button will control three options: Whether
the
Center
marker appears, whether the
Area
marker appears,
and whether the
Safety
marker appears.
F2
: By default, the
F2
button will control whether the audio
Level
Meters
appear on the screen.
F3 - F6
: By default, the
F3 - F6
buttons are undefined
.
Pressing the
F1
through
F6
buttons will light its green indicator,
showing that the option or options are in effect. Pressing the button
again removes the option or options, extinguishing the indicator.
Adjust Settings
Certain commonly accessed adjustments are accessed fairly directly by
pressing the
Adjust
button, lighting the green indicator in the button.
When this indicator is lit, the
Volume
knob is re-purposed to adjusting
the settings that follow. Pressing the
Adjust
button a second time exits
the menu, extinguishing the button’s indicator, as does the expiring of
the
OSD Time-out
set in the
OSD Menu on page 41
. After pressing the
IMPORTANT:
If a PMT PID row is highlighted in bright pink, this lets you know that
the stream is encripted (scrambled). This product by design is not
intended to monitor these streams, so do not attempt to select one.
