manualshive.com logo in svg

Wohler iAM-MIX-16-DA, User Manual, Page: 35 / 54

Share
Download
Wohler iAM-MIX-16-DA User Manual Download Page 35

 

 

 

Page

 

35

 

 

Installing the Software Locally 

Click on the 

System Update

 selection in the iAM-MIX Web GUI.  

System Information

 in the right pane shows currently installed software 

and hardware versions.  

Figure

 

A–1:

  

System

 

Update

 

 

 

 

 

 

Use the following steps to install a new software package into the iAM-MIX: 
 

1.

 

Insert the USB flash drive with iAM-MIX update package(s) into the 
front panel USB jack. Refer to the 

Download the Software

 section of 

this chapter for the specifics of download and file transfer to the USB 
flash drive.  

2.

 

A list of update file packages present on the USB drive will appear in 
the 

Description

 field area shown in Figure A-1, along with software 

Version

 number(s). Click on the one you want to use. If the “

USB 

flash drive does not contain …

” message below appears, the 

system has the latest software in it, and no further action is required 
or possible. 

3.

 

Click 

Update System

 button. 

Summary of Contents for iAM-MIX-16-DA























































Reviews:

No comments