Page
21
Figure
4–1:
Host
IP
Settings
Close the control panel and reboot the host computer after making an IP
address change to be sure the change takes effect.
Either reconnect to the
installed network or continue with this direct connection to access the iAM-
MIX Web GUI
.
Network Connection
When connected to a network, the iAM-MIX address will need to be changed
to another address in order to be compatible with the address assignments
for that particular network. Immediately after the host setup is complete,
change the iAM-MIX’s address. Make the corresponding address, mask and
gateway changes in the iAM-MIX
Network Setup
page. Refer to the
Network Setup
section of this chapter and Figure 4-11.
Otherwise set the iAM-MIX to DHCP address mode by checking the box for
‘Use DHCP?’ in
Network Setup
and have your IT administrator assign rights
and settings for operation on the network. Allow enough time for your
network’s DHCP server to recognize a new network device and assign an
address after booting.