manualshive.com logo in svg

Wohler iAM-MIX-16-DA, User Manual, Page: 22 / 54

Share
Download
Wohler iAM-MIX-16-DA User Manual Download Page 22

 

 

 

Page

 

22

 

Dashboard 

Throughout the iAM-MIX Web GUI, other pages are a click or two away on 
the left side. System Overview on this Dashboard page shows all Preset 
configurations at a glance.  

Figure

 

4–2:

  

Dashboard

 

Preset

 

Overview

 

 

 

The currently selected Preset for local operation is shown full color. Other 
stored, but not selected, Presets have gray backgrounds.  
The top row shows which sources are used in the Preset. The middle row 
shows which channel numbers are assigned to each control strip. Colors in 
the bottom row indicate green for active, or red for muted states.  
No changes can be made on this screen. Click 

View Details 

on the selected 

Preset, or click on 

Configuration - Presets Management

 in the left 

navigation pane to make Preset changes. 
The lower part of the page shows front and rear panels for setup reference, 
plus alerts, status and license information. Refer to Figure 4-3.  

Summary of Contents for iAM-MIX-16-DA























































Reviews:

No comments