manualshive.com logo in svg

Wohler iAM-MIX-16-DA, User Manual, Page: 32 / 54

Share
Download
Wohler iAM-MIX-16-DA User Manual Download Page 32

 

 

 

Page

 

32

 

 

Import Configuration 

 

Use this page to retrieve Presets from a USB flash drive inserted in the front 
panel port. Follow the instructions on the bottom of the page to complete 
the procedure. 

Figure

 

4–12:

  

Database

 

Import

 

 

 

Use the following steps: 

1.

 

Click the 

Import Presets

 button on the 

Database Management - 

Database Export / Import

 page. 

2.

 

Insert a flash drive in the front panel USB jack on the iAM-MIX you 
want to recover Preset data from.  

3.

 

Click the blue 

reload page

 link at the bottom of the page. The list of 

Preset databases that are contained on the Flash Drive will appear on 
the screen. 

4.

 

Select a Preset database from the list. The Preset data you selected 
will be copied into the iAM-MIX.  Do not withdraw the Flash Drive 
before all of the data is copied. 

These instructions are summarized on the 

Database Management - 

Database Export / Import

 page. 

Summary of Contents for iAM-MIX-16-DA























































Reviews:

No comments