Measurement Modes in the Main Menu
38
6.6
Option „Energy
Utilization
Check
“
Fig. 40: Energy Utilization Check
The Energy Utilization Check provides a checklist
to determine the potential efficiency improve-
ments.
NOTE!
It is necessary to connect the S-tube probe (see
accessories).
Select the supmenu "EUC" from the main menu.
In the Display the following options will appear:
Flue gas loss
Ventilation loss
Surface loss
Evaluation
How to activate an option:
Select the option with the up or down key.
Confirm with "OK".
Potential improvement points
Flue gas loss
Fig. 41: Standard characteristic curve
Fig. 42: Entering the Flue gas loss
The "Flue gas loss" function will convert the most
recently measured flue gas loss into potential
improvement points according to DIN EN 15378,
national annex.
How to convert the flue gas loss into potential
improvement points:
In the submenu "Energy Utilization Check"
select "flue gas loss". Enter the measured flue
gas loss.
The meter will convert the flue gas loss automati-
cally according to the standard curve in Fig. 41.
After the conversion, "Flue gas loss" will be
marked by a tick mark in the "Energy Utilization
Check" screen.
