Getting Started
18
4
Getting Started
4.1
Check Battery Status
Fig. 9: Position of the batteries in the
Wöhler DC 410
FLOW
When the device is switched on, the battery indi-
cation is displayed in the upper right hand corner
of the screen. A fully charged set of batteries is
shown as a solid green battery symbol. An empty
red symbol indicates discharged or empty batter-
ies. If the batteries are almost empty the back light
will dim out. The warning "charge batteries" will
appear. In this case, finish the measuring process
as soon as possible.
WARNING!
Incorrect use of batteries can cause injury!
Never expose the battery to fire or high tempera-
tures. Danger of explosion!
Liquids can leak out of the batteries due to mis-
treatment. Never touch the liquid. If you got in
contact to the liquid remove it with water. If the
liquid got into your eyes, remove it with water and
see your doctor as soon as possible.
WARNING!
Risk of electrical shock!
Never touch the power supply with wet hands!
Protect the power supply against water and mois-
ture!
Do not unplug the recharger by pulling the cable!
Do not use the power supply when the voltage
requirements of the recharger and the supply do
not match!
The batteries can be recharged even while they
are located in the analyzer.
NOTE!
You can still go on measuring while battery
charging is in progress.
