Measurement Modes in the Main Menu
29
Fig. 25: Average value
In the display, the average of the speed readings
is shown above the readings.
The airflow is indicated in the upper part of the
display as the average of the results of all meas-
urements performed until now.
NOTE!
Select "Print" to print out a report.
Fig. 26: Finish the measurement
In the Evaluation menu select "Finish meas-
urement" (top of the display) to finish the
measurement.
Fig. 27: Main menu when the readings
have been accepted.
In the main menu, a tick mark beside the menu
"Airflow (Pitot)" will indicate that the airflow meas-
urement has already been done.
Select "Print" to print out a report.
Note
If the airflow reading is not stable or if the resolu-
tion is not high enough, go to the Setup-menu
and select Attenuation > fine (see chapter 6.12)
