© 2010 Wohler Technologies, Inc. All rights reserved.
11
AMP V Series User Guide
Front Panel Controls
AMP1-V2DA-Specific Controls
Figure 1–3
AMP1-V2DA Front Panel
•
Analog/Digital Select
(Toggle Switch): This two position switch
selects between two primary input sources, analog or digital. When
this toggle switch is set to analog, the unit will monitor the signals
as input on the rear panel
Analog In
phoenix connectors. When
this toggle switch is set to digital, the unit will monitor the AES
digital source as input on the rear panel AES In BNC connectors.
•
AES 1 & 2
(LEDs): These two bi-color (green/red) LEDs indicate
the input presence and status of the two AES input signals. These
LEDs function whether or not the AES digital signals are selected
for monitoring through the unit. Either LED glows green as long as
a valid AES digital datastream for the associated input channel is
being received. Either LED glows red to indicate errors in reception
or data errors (if the data has been tagged as inappropriate for
conversion to analog by having the validity bit set).
Speakers
Power
Volume
Speaker Assign
Headphones
Phase
Level Meters
Analog/Digital
Brightness
Balance
AES 1 & 2
