© 2010 Wohler Technologies, Inc. All rights reserved.
10
AMP V Series User Guide
Front Panel Controls
•
Balance
(Rotary Knob): This adjusts the volume balance between
the left and right speakers or headphones with the left and right
bass frequencies (summed together and reproduced in the woofer
channel) also responding to the balanced control.
AMP1A-VTR2-Specific Controls
Figure 1–2
Group Select
(Toggle Switch): On the AMP1A-VTR2 model, this
switch selects between the two groups (
Group 1
or
Group 2
) of four
channels as input on the rear panel. It is from the selected group of four
channels that the
Source Speaker Assign
channel buttons are used
to independently assign channels to the right and left speakers.
Example:
If an audio signal of a voice speaking English is fed to the left (A) input
and a voice speaking Spanish is fed to the right (B) input, then the left
speaker channel will reproduce the midrange and high-range
frequencies of the English speaking voice, the right speaker channel
will reproduce the midrange and high-range frequencies of the
Spanish speaking voice, and the woofer speaker channel will
reproduce the summed (combined) low-ranged of both voices.
Speakers
Headphones
Speaker Assign
Group
Level Meters
Balance
Phase
Brightness
Volume
Power
