Operating manual
Page 16 of 32
B0825
GMV-C
4.3 Level monitoring
4.3.1 For cartridge 04 / 05
A filling level control is fixed on the mounting bar of the cartridge bracket, which indicates an
"empty" message (NO contact) in case of empty supply from the tank. The filling level control
is connected by a plug M8x1, 3-pin.
The distance between filling level control and base plate has to amount to minimum 20 mm.
Increasing the distance, the residual quantity between "empty" message and final empty
supply can be varied.
4.3.2 For cartridge 40
Inside the cartridge tank, there is a filling level control built-in, which indicates an "empty"
message (NC contact). The filling level control is connected by a plug M8x1, 3-pin.
Level monitoring