WNQ F1-518CIt, Manual

Page: 4 / 15

1 4
[Assembling Steps]
Assembly step 2
：
Attach Cantalever (5) to Support tube 14 using 2X(59) M10*75-Bolt 、
4X(64)Φ10-Washer
、
2X(68)M10-Nut. Attach Cantalever 5 to Back tube 13 using 2X(59)
M10*75-Bolt
、
4X(64)Φ10-Washer
、
2X(68)M10-Nut. Place Shock-absorbed cushion 35
on Base tube 8 (for weight stack). Insert Leader 9 in Shock-absorbed cushion (35)
(make sure threaded insert side of 9 is upward) and insert Leader 9 into holes of Base
tube 8. Slide each Weight stack (33) into Leader 9. Insert Steeve 6 in slot under top
plate of Weight stack 33. Insert Briquetting (34) to Leader 6 and secure using 1X(52)
M8*70-Bolt
、
2X(63)Φ8-Washer
、
1X(67)M8-Nut. Slide Leader top tube 1 into Leader 9
and secure 1 on top of 9 using 2X(54)M10*20-Bolt
、
2X(65)Φ10-Big Washer. Attach
Muscle map base board 26,Leader top tube 1 and cantalever 5 using 2X(58)
M10*70-Bolt
、 4X(64)Φ10-Washer 、 2X(68)M10-Nut. Attach each Shield 7 to Base tube
8 each side using 2X(54)M10*20-Bolt
、
2X(64)Φ10-Washer.
4
STEP
2