7
F gu e 1
5. Parts Identification & System connection
5.1 Parts Identification of the driver fatigue monitoring system
Micro SD card socket
(For video recording)
IR transmission panel
4xIR(940) LED
Inside speaker
Inside camera
Power indicator light
i
r
5.2 System connection and Cable definition
The system connection based on driver fatigue monitoring system is as follows. The device Wi-Fi hot
spot is point to point, just for calibrating and setting the device parameters, and it can’t connect to the
Internet. There are two ways to power the device, connecting to the monitor or connecting to external
power source directly. So the monitor is optional, but if device is tested or calibrated, connecting the
monitor is recommended.
Figure 2