9
6. Installation & Calibration
The driver fatigue monitoring system should be place in the position that within angle to the front
view of the driver range about +/- 10 degrees and distance to the driver is about 0.8
～
1.2 meter. As
the following figure shows, to choose a proper position for fixing the device on the dashboard,
installation and calibration should be operated synchronously. So an assistant is recommended to
finish the calibration and registering (details operation on chapter 6, 7), who is to adjust the device,
guide the driver, and configure the device setting, etc.
Figure 7
1. Building the Wi-Fi connection
Before calibrating the driver fatigue monitoring system or setting the parameters of the device,
make sure the device is powered on. Then refer to following steps to finish the Wi-Fi connection
between mobile phone and driver fatigue monitoring system:
1) Install the APP, all of the operations and the parameters setting can only be done according to
the APP.
Note
: the App is only available in Android version yet, and it can download in Google play, named
“DSMA”. The IOS version is coming soon.
2) Search the driver fatigue monitoring system Wi-Fi hot spot named “DDWS-xxxxxxxx” according
to the mobile phone, and connect this Wi-Fi hot spot with the default password “12345678”.
Refer to the below figures.
