WMF Series 8400 bistro User Manual Download

Page: 22 / 72

User manual WMF bistro!

Software

3.2

ready to operate display

3.2.1

ready to operate display

Standard display for normal operation

• Warm rinse pad

Barista pad

•

Information

•

Standard display for SB mode (self-service)

All pads that allow changes to be made are not available.
The warm rinse pad, Barista pad, menu pad and messages
are inactive. Error messages are not shown, only the
Caution symbol is shown.

3.2.2

Warm rinse pad

Touch the warm rinse pad

Rinsing of the pipes with hot water begins. The water
warms the brewing system and guarantees an optimum
coffee temperature.

3.2.3

Barista pad

Touch the Barista pad

The coffee strength will be altered once for the next brew.

Recommended after a longer
brewing pause, especially before
dispensing a cup of espresso.
Warm rinse pad (active / inactive)

Settings

Operating options

page 37

weaker (-15 %)

normal, as per setting

stronger (+15 %)

Barista pad (active / inactive)

Settings

Operating options

page 37

Summary of Contents for Series 8400 bistro









































































Search results

Summary of Contents for Series 8400 bistro

Reviews:

Related manuals for Series 8400 bistro

Brands by name

Popular brands

WMF Series 8400 bistro, User Manual

Search results

Summary of Contents for Series 8400 bistro

Reviews:

Related manuals for Series 8400 bistro

Brands by name

Popular brands