WMF Bistro! User Manual Download Page 43

Page: 43 / 68

User Manual WMF bistro!

Care

Foamer cleaning Plug&Clean

Cleaning with Plug&Clean consists of three parts.
• Automatic foamer rinsing for a maximum of 3 minutes

after each beverage with milk or milk foam

• Display-guided Plug&Clean cleaning
•

Once per week

, lay combi spout, milk hose and milk

nozzles in a cleaning solution

5.3

Choc system rinsing

Choc system rinsing is interim cleaning of the mixer.

See Cleaning instructions for Choc system rinsing.

5.4

General cleaning

Grounds container cleaning (grounds chute, optional)

Empty the grounds container and rinse under running
water

Clean with a clean, damp cloth

Drip tray, housing and front panel

Clean the cold machine using a damp cloth

Wipe dry using a fine woollen cloth or chamois leather

Cleaning metal surfaces

For cleaning metal housing parts (matte surface) we
recommend WMF Purargan® cleaner.

Do not clean with scouring powders or the like.
There is a risk of causing scratches or scores.
Do not use any sharp cleaning materials or implements.
Use soft cloths for cleaning.

Plug&Clean cleaning program

Cleaning instructions

The Choc system rinsing is an
integral part of the cleaning
program.

Order numbers for the WMF care
program

Appendix

Accessories and spare parts
page 64

Switch off the machine before
cleaning the front panel to avoid
a beverage being accidentally
dispensed.

Risk to the machine.

Follow the manual .

Summary of Contents for Bistro!





































































Search results

Summary of Contents for Bistro!

Reviews:

Related manuals for Bistro!

Brands by name

Popular brands

WMF Bistro!, User Manual

Search results

Summary of Contents for Bistro!

Reviews:

Related manuals for Bistro!

Brands by name

Popular brands