WMF Bistro! User Manual Download Page 20

Page: 20 / 68

User Manual WMF bistro!

Software

3.2

Ready to operate

3.2.1

“Ready to operate” display

Standard display for normal operation

•  “Warm rinse” pad
•  Barista pad
•  Menu
•  Information

Standard display for SB mode (self-service)

All pads that allow changes to be made are not available.
The “warm rinse” pad, Barista pad, menu pad and messages
are inactive. Error messages are not shown, only the
Caution symbol is shown.

3.2.2

“Warm rinse” pad

Touch the “warm rinse” pad

A rinse of the pipes with hot water begins. The water
warms the brewing system and guarantees an optimum
coffee temperature.

3.2.3

Barista pad

Touch the Barista pad

The coffee strength will be altered for the next brew only.

W e

2 4 . 1 1 . 2 0 1 0

0 8 : 1 5

W e

2 4 . 1 1 . 2 0 1 0

0 8 : 1 5

Recommended after a longer
brewing pause, especially before
dispensing a cup of espresso.
“Warm rinse” pad (active/inactive)

Settings

Operating options

page 35

weaker (-15 %)

normal, as per setting

stronger (+15 %)
Barista pad (active/inactive)

Settings

Operating options

page 35

Summary of Contents for Bistro!





































































Search results

Summary of Contents for Bistro!

Reviews:

Related manuals for Bistro!

Brands by name

Popular brands

WMF Bistro!, User Manual

Search results

Summary of Contents for Bistro!

Reviews:

Related manuals for Bistro!

Brands by name

Popular brands