WMF Bistro! User Manual Download Page 34

Page: 34 / 68

User Manual WMF bistro!

Software

Water filter is fitted

Query regarding whether the WMF Service is enabled.
Set here whether a scale filter / water filter is fitted or not.
This affects the descaling intervals.

Capacity

Scale filter / water filter: filter capacity is set here.
(The water filter capacity can be found in the water filter
documentation.)

Warm-up rinsing

Whether the coffee machine should rinse out the brewing
unit with hot water after heating up is set here.

Recommended setting: active.

SB mode (self-service)

(active/inactive, default value: inactive)

SB mode active

•  No manual insert (only cleaning tablets)
•  No beverage preselection possible
•  It is not possible to interrupt the beverage

dispensing cycle

•  Menu pad delayed
•  Maintenance and error messages suppressed
•  Barista pad and “warm rinse” pad not displayed

Foamer rinsing

Whether automatic foamer rinsing should occur after the
last beverage with milk components is dispensed.
yes/no

It is not possible to interrupt the beverage
dispensing cycle.

softener/filter

Filter capacity

This point can be selected
by trained personnel if the
WMF Service function has been
enabled.

warm up rinsing

selfService mod

foamer rinsing

Summary of Contents for Bistro!





































































Search results

Summary of Contents for Bistro!

Reviews:

Related manuals for Bistro!

Brands by name

Popular brands

WMF Bistro!, User Manual

Search results

Summary of Contents for Bistro!

Reviews:

Related manuals for Bistro!

Brands by name

Popular brands