WMF 150 F, User Manual

Page: 45 / 72

45
User Manual WMF 150 F
+
1 2
1
2
1x
1x
START
STOP
START
STOP
+
1 2
1
2
2x
1x
START
STOP
START
STOP
3.2 Setting the display to show cups or
litres
The machine is factory-set to display the number of cups. You
can adjust the setting as follows:
► Press the selection button [1] and hold it.
► Press the start/stop button [2]. A number shows in the
display.
► Release the buttons.
► Press the start/stop button [2] again. A “C” (Cups) shows in
the display.
► Press the selection button [1] to change the “C” to an “L”.
►
Wait 10 seconds. The setting has been saved.
3.3 Setting the prewet function
The machine can brew coffee with two methods:
• Continue-brew (“Cb ”) (factory setting). The coffee making
process begins immediately and pours hot water over the
ground coffee without a waiting time.
• Prewet-brew (“Pb”). First, a part of the hot water is poured
onto the ground coffee. This causes the coffee to rise so
that the smells and fl avours are released. The coffee making
process begins after 1 minute delay.
You can set the machine to Prewet brew as follows:
►
Press the selection button [1] and hold it.
► Press the start/stop button [2]. A number shows in the
display.
► Release the buttons.
►
Press the start/stop button [2] two times. “Cb” (Continue-
brew) shows in the display.
►
Press the selection button [1] to change “Cb” into “Pb”
(Prewet-brew).
►
Wait 10 seconds. The setting has been saved.