WLD-TEC Fuego, Instruction Manual, Page: 32 / 60

32
7. Turbo flame
If the cover of the burner shaft (17) is removed the flame is extremely firm and
consistent. To take off the cover of the burner shaft unscrew the screw (18) completely
with the included screwdriver
(R3)
. With an open burner shaft the intensity of the flame
cannot be adjusted by the air knob
(2)
any longer. During the use of the turbo flame
most of the needed air is taken inside through the open burner shaft. Remounting the
cover of burner shaft
(see paragraph 6.2) .
9. [Fuego basic RF] Changing the batteries
Change the batteries in the wireless foot pedal as soon as the function LED
(20)
signals
"batteries low". (intermittent lighting up of the LED, duration approx. 1 sec.)
Switch off the laboratory gas burner while changing the batteries, to avoid
inadvertent activation of the laboratory burner through unintended pressing
of the foot pedal while inserting the batteries.
Change both mignon batteries (AA) in the battery compartment of the wireless foot pedal
(21) . Pay attention to correct insertion in accordance with the batteries’ polarity (see label in
the battery holder of the foot pedal).
10. Warranty
All Fuegos are covered under our two-year manufacturer warranty against any
manufacture defects in material and workmanship. The WLD-TEC warranty guarantees
all Fuegos under normal usage conditions and does not cover any damages as a direct
result of user misuse or/and abuse. The warranty is void upon any unauthorized
servicing, disassembly or modifications.
[Fuego basic RF] In respect of parts to wear and tear (e.g. batteries) this warranty shall
be valid for six months from the date of purchase.
8. Tilt adjustment
Insert the tilt adjustment (R1) into the slots (19)
at the bottom of the unit. The tilt adjustment can
be used to the left or right side to protect the
burning chamber from contamination when
working with liquids.
R1
Fig. 8./1
!