48
3. Application programs
This section explains the different application programs and how to vary the burning
times. Apart from the temperature monitoring, the symbols in the application programs
are animated to simplify their use.
3.1 Button Start-Stop
The flame is ignited by actuating the function
knob (1). To extinguish the flame actuate the
function knob (1) once again. In addition the
burner is automatically stopped if the burning
time has expired.
To change from the "Start-Stop button"
application program to the next program, turn the function knob (1) to the right.
Varying the burning time 1sec. - 2 h: The burning time can only be set when the
flame is off. To do this, turn the function knob in the application program to the left
(see navigation arrows). The burning time blinks. The minutes can be varied by turning
the function knob (1). After setting the minutes, briefly push the function knob (1).
The seconds can now be varied by turning the function knob (1). Once the desired
time has been set, briefly push the function knob (1) to return to the application
program. The burning time set has been memorized.
i
Button Start-Stop
Fig. 3.1/1
3.2 Sensor Auto-Off
The flame is ignited by passing your
hand over the IR-Sensor (5). The flame
extinguishes automatically after the burning
time has expired. Alternatively the burner
can be stopped by a short push on the
function knob (1).
If the DoubleClick function is switched off, the
flame ignites IMMEDIATELy if the IR-Sensor
is activated, i.e.: if a hand or an object is within
the detection range!
The status of the IR-Sensor is shown on the display.
If the IR-Sensor perceives a hand or an object in the
detection range, the "Sensor activated" symbol is displayed.
If the DoubleClick function is switched on to activate the flame,
(see paragraph 5.2) after the first sensor activation, the
"2x" symbol appears for the duration of the DoubleClick time
which has been set. During this time, pass your hand once
again over the sensor in order to ignite the flame. The settings
for the IR-Sensor (DoubleClick, DoubleClick time and detection
range) can be set individually (see paragraph 5.2).
Varying the burning time 1sec. - 2 h: The burning time can only be set when the
Sensor Auto-Off
Fig. 3.2/1
Sensor activated
Fig. 3.2/2
2x-Symbol
i
!
