WIZ127SR User’s Manual
24
Device IP: WIZ127SR’s IP Address
Gateway: WIZ127SR
’s Gateway Address
Subnet mask
: WIZ127SR’s Subnet Mask
DNS server: DNS Server’s IP Address
☞
If you are unclear about your Local IP, Subnet Mask, Gateway information, you have
to get this information from your network administrator. If the IP address is not correct,
IP collision or network problems may occur.
8) F/W Version
It displays the firmware version.
9) Enable Serial Debug Mode
If this mode is enabled, you can monitor the status and socket messages of WIZ127SR through
the serial terminal (listen OK, connect fail and etc.). In this mode, debug messages can cause
abnormal operation of the serial device. Therefore, you should use this mode only for debugging.
10) Network Status
This field shows the Connection Status of UART0 and UART1 in WIZ127SR. The message
“Connected” will be displayed when a peer successfully connects to WIZ127SR.