Wizard ON-AP6RK-33X-2M, User Manual, Page: 8 / 21

IR Intelligent Speed Dome Camera User Manual
- 7 -
range of 1~255. Every camera’s dome address should be same as the DVR or keyboard’s. Dip
switch use binary, dial every number to be "ON" is means as 1, dial to be "OFF" is means as 0,
details please reference the sheet.
Address codes and dial codes switch sheet (Binary), calculate it according to this sheet;
Binary Add Binary Add Binary Add Binary Add
0000000 0 11110000 15 01111000 30 10110100 45
10000000 1 00001000 16 11111000 31 01110100 46
01000000 2 10001000 17 00000100 32 11110100 47
11000000 3 01001000 18 10000100 33 00001100 48
00100000 4 11001000 19 01000100 34 10001100 49
10100000 5 00101000 20 11000100 35 01001100 50
01100000 6 10101000 21 00100100 36 11001100 51
11100000 7 01101000 22 10100100 37 00101100 52
00010000 8 11101000 23 01100100 38 10101100 53
10010000 9 00011000 24 11100100 39 01101100 54
01010000 10 10011000 25 00010100 40 11101100 55
11010000 11 01011000 26 10010100 41 00011100 56
00110000 12 11011000 27 01010100 42 10011100 57
10110000 13 00111000 28 11010100 43 01011100 58
01110000 14 10111000 29 00110100 44 11011100 59
……………
00111100 60 10111100 61 01111100 62 11111100 63
……………
00011111 248 10011111 249 01011111 250 11011111 251
00111111 252 10111111 253 01111111 254 11111111 255
4.2 Baud Rate Setting
Set No. 1~2 dip switch of SW2 for the baud rate. It can set up the baud rate to 2400BPS
、
4800BPS
、
9600BPS. Dial every number to be "ON" is means as 1, dial to be "OFF" is means as 0
，
Baud rate and dial codes switch matching sheet reference sheet.
Dial Codes 2400 bps 4800 bps 9600 bps
No. 1 ON OFF ON
No. 2 OFF ON ON
No. 3 OFF OFF OFF
No. 4 OFF OFF OFF
Please reference above table to finish the dip switch setting.
4.3 Protocol Setting
Decoder of Speed dome will automatically match protocol, no need to set;PELCO_D
、
PELCO_P
are support