Wizard ON-AP6RK-33X-2M, User Manual, Page: 12 / 21

IR Intelligent Speed Dome Camera User Manual
- 11 -
6.System OSD menu setup(for models with OSD menu)
6.1 Self Test Display
After powering on speed dome, the speed dome will pan and tilt automatically, and it will
show the system information . After system information disappear, the self test over. The system
information show as below
Address: 001
Protocol: Pelco-D
Baud rate: 2400
Note: different speed dome setup, will show different content
6.2 Main Menu
After powering on speed dome, and the speed dome can work normally, call preset 95, enter
to main menu, show as below
Main menu
1.system information
2.system setup
Main Menu
System Information
、
System Setup
、
Function Setup
、
Display
Setup
、
Camera Menu Setup
、
Factory Default
、
Exit
System
Information
Version:V5.0.4
Address:01
Protocol:Pelco-D
Self test:OK
System Setup
motion flip:on
Speed Matching
:on
Motion speed:02
Time setup
IR setup
Communication
Setup
system
language:EN
Function Setup
preset setup
Idle task setup
patrol setup
Timingtask
setup track
setup
Display Setup
Syetem time display:off
Orientation displayy:on
Bootinformation display
:10 S
Back
Camera
Menu Setup
preset setup
preset:01
Location setup
delete current
preset
Delet all preset
back
Idle tak setup
Idle task:patrol 1
Idle time:60
（
s
）
back
Patrol setup
Patrol:01
Patrol setup
Call patrol
Delete patrol
back
Timing task setup
task run:off
Task setup
Delete task
back
Track setup
track No.:01
Track setup
call track
delete track
back