IR Intelligent Speed Dome Camera User Manual
- 12 -
3.function setup
4.display setup
5.camera menu setup
6.factory default
7.exit
keyboard button function explanation:
[RIGHT]pan right;Enter to sub menu or a setup
[LEFT]pan left;Return to previous menu or exit a setup
[UP]tilt up;During menu setup, move menu option up or modify parameter
[DOWN]tilt down;During menu setup, move menu option down or modify parameter
6.3 Syetem Information
Users can check the speed dome information by menu, the information include: speed dome
address, baud rate, protocol, speed dome title, program version etc. The method as below
Move the Cursor to
【
system information
】
, press right to enter system information menu
System information
1.version;V5.0.4
2.address;01
3.protocol;Pelco-D
4.baud rate;2400
5.self test;OK
6.back
6.4 System Setup
Users can setup the speed dome function by this menu. Move the cursor to
【
system setup
】
,
press right to enter system setup menu
system setup
1
、
motion flip:off/on
2
、
speed matching;off/on
3
、
motion speed: 02
4
、
time setup:
5
、
IR setup:
6
、
communication setup;
7.language:Chinese/English
Motion flip: open or close the flip function;
Speed matching: when speed dome is zooming, the control speed will change as well;
Motion speed: control speed adjustment;
Time setup:set the system time for the speed dome;
IR setup: set the IR mode and sensitivity ;
Communication setting ;the PTZ camera’s communication information setting.
System language: set the PTZ camera’s menu language
6.5 Special Function
Move the cursor to Special function,you can setting through this menu :Preset func / Idel
func/ Patrol func /Timer Task /Trace func .
