\Manuals\5000Hardware
07/07/03
3
Series 5000 Hardware Guide
3. Screw Stop Screw back in place on left end of lower rail (Fig C). Move the Gantry to the left side of the Board until it
stops.
Fig C.
Fig C: Screw in the Stop Screw back in place.
4. Slide Wire Carrier back into place and replace Allen screws with the long Allen wrench (Fig D).
Fig D.
Fig D: Replace the Allen Screws to the Wire Carrier.
5. Reattach small air tube that is connected to a 90 degree elbow that goes through the metal plate (Fig E).
Fig E.
Fig E: Connect the air hose on Wire Carrier
6. Replace Wire Carrier Cover, making sure that the screw goes through Grounding Wire (Fig F).
Fig F.
Fig F: Replace the Wire Carrier Cover for the Wire Carrier
