0
Wizard™ International, Inc., 4600 116th St. SW, PO Box 66, Mukilteo, WA 98275 888/855-3335 Fax: 425/551-4350
wizardint.com
No Horizontal Bolt? Remove small Allen screw to the right of right-hand Hinge and call HelpDesk for a Hinge Kit.
Fig C.
Fig D.
Fig C-D: Remove Horizontal Bolt from Head and right Hinge on the Trolley Plate.
5. Gently slide Head right (rocking up and down may help). Head should now slide off Left Hinge pins (Fig E).Place in a safe
place.
Fig E.
Fig E: Remove Head from pin on left Hinge.
Head Installation
1. If this is a new board, remove Horizontal Bolt from right Hinge on Trolley Plate using the 9/64 Allen Wrench (Fig A). Trol-
ley Plate is the flat plate located between the Gantry arms.
Fig A.
Fig A: Remove Horizontal Bolt from right Hinge on the Trolley Plate.
