WT-1018 GSM Fixed Wireless Terminal
___________________________________
8
WT-1018 – User Manual – Rev.1.2 – Technical Support:
-
www.witura.com
COPYRIGHT ©2007 WITURA CORPORATION SDN BHD
*3*4*0#
Cancel the setting for Barred National
Calls
6 Setting
Local
Area
Code
*1*XXXXXX#
When dialing Local Prefix Number, it
will automatically add Local Area Code.
Able to set up to 6 digits for Local Area
Code.
*1*#
Delete Add Local Area Code.
7 Setting
for
adding
“0” in front of
destination number
*3*5*#
After doing this setting, when making
call for International mobile phone
number, it will automatically add 0 in
front of the dialed number.
*3*5*0#
Cancel the setting for adding “0”
8 Setting
Local
Prefix
Number Gateway
*4*1*#
After doing this setting, when making
Local Calls, it will automatically dial
Gateway Number in front of the
Destination Number.
*4*1*0#
Cancel dialing Gateway Number in front
of the Local Number
9 Setting
International Prefix
Number Gateway
*4*2*#
After doing this setting, when making
International Calls, it will automatically
dial Gateway Number in front of the
Destination Number
*4*2*0#
Cancel dialing Gateway Number in front
of the International Number
10 Setting
National
Prefix Number
Gateway
*4*3*#
After doing this setting, when making
International Calls, it will automatically
dial Gateway Number in front of the
Destination Number.
*4*3*0#
Cancel dialing Gateway Number in front
of the International Number
11 Setting
for
Locking
SIM Card
*5*1*#
After doing this setting, the terminal will
lock the SIM card with a password.
Note:
The terminal can only lock the
SIM card if the SIM card PIN number is
1234
(default) otherwise it will display
“
PIN ERROR 02
”. The locked SIM
card can only be recognized by the
terminal for unlocking.
*5*1*0#
Cancel Locking SIM card. After doing
this settings, terminal will unlock the
SIM card and restore the PIN number of
the SIM card to
1234
(default).
12 Setting
for
Locking
Terminal
*5*2*#
After doing this setting, the terminal can
only accept this particular SIM card.
Only be able to use other SIM after
unlocking the phone or deleting the SIM
Card ID
*5*2*0#
Cancel Locking Terminal.
13
Setting for Changing
Password
*6*XXXXXXXX# Before
doing
this setting, user will need
to use the default password “83211279”
to go into Programming Setting Mode to
be able to use this programming code to
change the password.
