WT-1018 GSM Fixed Wireless Terminal
___________________________________
3
WT-1018 – User Manual – Rev.1.2 – Technical Support:
-
www.witura.com
COPYRIGHT ©2007 WITURA CORPORATION SDN BHD
Main Features
•
Adopt advanced microprocessor controlling circuit, run steadily. Capability is ascendant
•
Adopt high gains antenna. Signal is strong
•
Be applicable for GSM900MHz/DCS1800MHz/PCS 1900MHz
•
Call or called function can be set up flexibly
•
The functions of locking terminal, locking SIM card, locking network and locking cell can be set up
conveniently.
•
Function of displaying incoming calls.
•
Provide accurate anti-polarity signal for billing equipment to charge
Caution:
1.
This terminal should not be used at garage, oil storage and chemical plant or near to flammable or
explosive substance.
2.
This terminal should be avoided in the hospital. It will interfere medical electronic equipments such as
pacemaker and audiphones. This terminal could only be used indoors.
3.
If it is found that the terminal is not successful in login onto the network, please check whether the SIM
card and antenna are installed well or not.
4.
Don’t use the SIM card that has been used in this terminal to other device. Please make sure the initial
PIN code of SIM card is 1234 and disabled when installing SIM card.
5.
It is forbidden to touch the antenna when the connected telephone is being used. (being making calls or
receiving calls), otherwise the terminal will be damaged. This kind of damage is beyond the range of
warranty.
6.
When the terminal is using, it should be placed where the signal of network is strong enough. In order
to ensure the quality of call voice, the terminal should be far from other electronic equipment.
7.
The terminal does not identify SIM card of 5V and 1.8V, only identify 3V SIM card.
8.
Don’t disassemble the terminal by yourself. If there is any problem, please contract the authorized
personnel.
9.
Working voltage of wireless terminal ranges from 6.0V to 7.5V.
Storage
1.
Terminal that is packed or not should piled up no more than 10 layers.
2.
The terminal should be saved in ventilate and dry place.
3.
Don’t knock terminal to avoid breaking the case.
4.
Don’t use chemic impregnate to clean terminal, but use dry soft cloth to make it clean.
