Änderungen vorbehalten!
Subject to change without notice!
© WITTUR – All rights reserved
3.5
Mounting to the car frame
1)
Fix first safety gear housing to the car frame
2)
Shove synchronization tube into the
activation shaft (do not tighten the screws)
3)
Fix second safety gear housing to the car frame
4)
Slide synchronization tube into both
activation shafts (left and right)
5)
Fill the gap (if big) between synchronisation tube
and activation shaft (left and right) with proper
single shim plate or stacked shim plates according
to the actual condition.
6)
Fix synchronisazion tube
A
Progressive Type Safety Gear
CSGB-01C
Operating instructions
Blatt/
sheet
PM.7.003609.EN.010
Datum/
date
14.07.2016
Stand/
version
Geprüft/
approved
WAT/MZE
A-02.05.2017
