Anchor 4000
Installer manual
Installation and commissioning instructions
en_A4000-Teil 2-Errichterhandbuch V2.03.docx
7 / 7
Keypad test
We recommend a final keypad test using function menu 5 to ensure that all the numeric keys
function properly.
☼
Checking the menu system
Press the keys in the
sequence
…
=
Press each numeric key once.
A functional key is indicated by a
double signal tone.
A key that is not recognised is
indicated by a long signal tone and
the function test is terminated. The
system must be checked.
System setup
The setting options and the control sequences that are required are described in the user
manual.
We therefore recommend the following procedure:
Setup of the users [menu 1]
if applicable, parameterisation of the inputs and outputs [menu 6]
if applicable, setting up the Dualcode condition [menu 6]
if applicable, setting up the delay time [menu 9]
In particular, the user system can be made markedly faster by using setup mode [menu 8].
The repetitive input of the master code is then restricted to selecting setup mode.
